SYMPTOM EXPLORER / Transmission & drive

Clutch slipping .

A clutch can slip through wear, contamination or release-system faults. Do not use a stall test or high-load acceleration to prove it.

◷ At your pace · no tools required ⌁ Browser-local results
SYMPTOM EXPLORER
Select a highlighted component02
TransmissionEngine
Illustrative layout · equipment varies by vehicle

This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.

01 / SYMPTOM EXPLORER

Let’s follow the clues.

A few observations help separate the possibilities. Start with safety, then explore the symptoms you already know.

Notice the cluesConnect the dotsFind your next step

At your pace · no tools required

Understand the possibilities

Clutch friction loss or contamination

+

Worn or contaminated friction surfaces or inadequate clamping can let engine speed rise without matching drive.

Slip under ordinary load differs from difficulty disengaging or selecting a gear. Do not perform stall or high-gear abuse tests.

After confirmation

Check friction wear, contamination, release freedom and correct fitment before selecting clutch repairs.

Clutch release or hydraulic actuation

+

A release bearing, cable, hydraulic cylinder or pedal mechanism fault can prevent full disengagement or pedal return.

Gears easier to select with the engine off or a changed pedal feel support checking the release system.

After confirmation

Inspect actuation, leakage, adjustment and release travel using the vehicle-specific procedure.

External engine-oil leak

+

Oil can escape from seals, gaskets, filter areas or housings. A stain does not establish the original source.

A falling measured level plus fresh oily traces supports tracing an external leak; airflow can carry oil away from its origin.

After confirmation

Identify the fluid and trace the leak professionally, then repair the verified seal or component and recheck level.

Urgent signs

Has drive been lost in traffic, or is there smoke, a strong burning smell or a large fluid leak?

Stop driving as soon as you can safely do so. Switch the vehicle off and obtain professional roadside assistance. Do not restart to investigate.

Checks you can make safely

Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

Leave these to a professional

Do not reach into a running engine bay, work under an unsupported vehicle, bypass safety systems or open fuel, high-voltage or refrigerant circuits.

When to get help

Arrange professional inspection. Share the conditions, warning messages and your answers; ask the workshop to confirm the cause before repair.

This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.

A little more clarity

Can this confirm the failed part? +

This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.

Technical references

Sources explain general principles. Exact procedures and equipment depend on your vehicle. Editorial synthesis; no independent mechanic sign-off claimed.

Follow a related clue

Follow a related clue

Menu

Add CarFaultAtlas