Power windows not working .
Compare one window with all windows and motor sound with glass movement. Keep fingers clear and never defeat anti-pinch protection.
This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.
Let’s follow the clues.
A few observations help separate the possibilities. Start with safety, then explore the symptoms you already know.
At your pace · no tools required
Understand the possibilities
Window regulator or mechanical guide
+
A regulator or guide fault may prevent glass movement even if the motor can be heard. Jammed glass must not be forced.
Motor sound with stationary, tilted or dropped glass points to mechanical inspection rather than assuming a dead switch.
After confirmation
Professionally secure the glass and inspect regulator, guides and motor without defeating anti-pinch protection.
Wiring, connector or control-module signal
+
An intermittent connection or module signal can interrupt a function even when the mechanical component is intact.
Intermittency, several affected functions or onset after repair support circuit checks before a component is condemned.
After confirmation
Use vehicle-specific diagrams, fault data and supply/ground tests to confirm the affected circuit.
Discharged or weakened 12 V battery
+
A weak 12 V supply may cause slow cranking on combustion vehicles, dim lights or failure to reach READY on an EV or hybrid. Voltage alone does not establish battery health.
Slow cranking and light dimming support this path more than normal-speed cranking.
After confirmation
Test battery state, charging and connections; charge or replace only as appropriate for the vehicle.
Urgent signs
Is there smoke, a burning smell, a hot or damaged battery, or exposed wiring?
Stop driving as soon as you can safely do so. Switch the vehicle off and obtain professional roadside assistance. Do not restart to investigate.
Checks you can make safely
With the vehicle off, look for obvious case damage or corrosion without touching terminals. Do not disconnect the battery with the engine running.
Leave these to a professional
Do not reach into a running engine bay, work under an unsupported vehicle, bypass safety systems or open fuel, high-voltage or refrigerant circuits.
When to get help
Arrange professional inspection. Share the conditions, warning messages and your answers; ask the workshop to confirm the cause before repair.
This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.
A little more clarity
Can this confirm the failed part? +
This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.
Technical references
Sources explain general principles. Exact procedures and equipment depend on your vehicle. Editorial synthesis; no independent mechanic sign-off claimed.
Follow a related clue
Central locking not working
Which doors and control methods fail is useful evidence. Distinguish the key signal, one latch and a shared electrical problem.
Battery keeps going flat
Separate a battery that cannot hold charge from insufficient charging or an electrical load during parking.
Key fob not detected
A key warning can reflect the key, interference or vehicle power. Use only the exact backup procedure in your own manual.