# Wipers not working

Visibility is the first concern. Separate an obstructed mechanism, shared electrical supply and an automatic-mode-only problem without putting hands near energized wipers.

> This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.

## What you may notice
- Wiper arms remain still or move abnormally
- May affect every speed or automatic mode only

## Understand the possibilities
### Wiper linkage, motor or obstruction
A seized linkage, motor fault or external obstruction can stop wipers. Frozen blades must not be forced and hands must stay clear of an energized mechanism.

**What distinguishes it**
A motor sound without arm movement differs from complete silence; both need the correct power-off inspection.

**Safe observation**
Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

**After confirmation**
Professionally check linkage, motor supply and controls; do not drive when required visibility cannot be maintained.

### Wiring, connector or control-module signal
An intermittent connection or module signal can interrupt a function even when the mechanical component is intact.

**What distinguishes it**
Intermittency, several affected functions or onset after repair support circuit checks before a component is condemned.

**Safe observation**
Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

**After confirmation**
Use vehicle-specific diagrams, fault data and supply/ground tests to confirm the affected circuit.

### Warning interpretation and exact message
The same color or similar symbol may cover different systems. Identify the exact symbol and message in the manual before deciding severity.

**What distinguishes it**
A lamp during the ignition self-test differs from one remaining on during operation, but a red stop message must never be dismissed.

**Safe observation**
Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

**After confirmation**
Record the message and operating state and obtain model-specific diagnostic help for persistent warnings.

## Checks you can make safely
- With the vehicle off, look for obvious case damage or corrosion without touching terminals. Do not disconnect the battery with the engine running.

## Leave these to a professional
- Do not reach into a running engine bay, work under an unsupported vehicle, bypass safety systems or open fuel, high-voltage or refrigerant circuits.

## Urgent signs
- Is there smoke, a burning smell, a hot or damaged battery, or exposed wiring?

Stop driving as soon as you can safely do so. Switch the vehicle off and obtain professional roadside assistance. Do not restart to investigate.

## When to get help
Arrange professional inspection. Share the conditions, warning messages and your answers; ask the workshop to confirm the cause before repair.

## Technical references
Sources explain general principles. Exact procedures and equipment depend on your vehicle. Editorial synthesis; no independent mechanic sign-off claimed.
- [HELLA: Changing wipers correctly](https://www.hella.com/lightstyle/uk/changing-wipers-correctly.html)
- [HELLA: Central locking system: function and troubleshooting](https://www.hella.com/techworld/in/technical/sensors-and-actuators/zentralverriegelung/)
- [HELLA: Air-mass sensor — function and troubleshooting](https://www.hella.com/techworld/en/technical/sensors-and-actuators/check-air-mass-sensor/)
- [Ford: Owner manual — maintenance information messages](https://www.fordservicecontent.com/Ford_Content/vdirsnet/OwnerManual/Home/Content?ProcUid=G1953908&Uid=G1953905&buildtype=web&countryCode=USA&div=f&languageCode=EN&userMarket=THA&vCode=&vFilteringEnabled=False&variantid=6125)

## A little more clarity
### Can this confirm the failed part?
This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.
