# Wheel wobble

Visible wobble or severe vibration needs prompt professional assessment. Tire integrity, wheel runout and hub condition must be checked before balancing alone.

> This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.

## What you may notice
- Wheel appears to wobble or car shakes rhythmically
- May begin after an impact or wheel work

## Understand the possibilities
### Wheel or tire condition
Imbalance, tire damage or wheel distortion can create speed-related steering vibration, including when braking.

**What distinguishes it**
Vibration at a particular speed even without braking points toward a wheel/tire check.

**Safe observation**
When safely parked, check cold tire pressures against the vehicle placard and inspect visible tread and sidewalls without going under the car.

**After confirmation**
Check tire integrity, wheel runout, mounting and balance before alignment or parts replacement.

### Tire structural or wheel damage
A bulge, exposed cord, damaged wheel or sudden deformation can compromise tire integrity and control.

**What distinguishes it**
An outward bulge differs from a normal shallow sidewall indentation; uncertain damage needs specialist assessment before use.

**Safe observation**
When safely parked, check cold tire pressures against the vehicle placard and inspect visible tread and sidewalls without going under the car.

**After confirmation**
Stop use of a damaged tire/wheel and obtain safe recovery or manufacturer-approved spare assistance. Sidewall bulges are not repaired by balancing.

### Wheel bearing or hub condition
A worn wheel bearing can hum or growl with speed and changing load. Sound travels through the body and can be difficult to locate.

**What distinguishes it**
Noise that changes with turning may fit a bearing, but does not reliably identify which side is faulty.

**Safe observation**
Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

**After confirmation**
Inspect all relevant hubs, bearing play and related ABS encoders professionally before replacement.

## Checks you can make safely
- When safely parked, check cold tire pressures against the vehicle placard and inspect visible tread and sidewalls without going under the car.

## Leave these to a professional
- Do not reach into a running engine bay, work under an unsupported vehicle, bypass safety systems or open fuel, high-voltage or refrigerant circuits.

## Urgent signs
- Is control difficult, is the car suddenly unstable, or is a wheel or tire visibly damaged?

Stop driving as soon as you can safely do so. Switch the vehicle off and obtain professional roadside assistance. Do not restart to investigate.

## When to get help
Arrange professional inspection. Share the conditions, warning messages and your answers; ask the workshop to confirm the cause before repair.

## Technical references
Sources explain general principles. Exact procedures and equipment depend on your vehicle. Editorial synthesis; no independent mechanic sign-off claimed.
- [MOOG: Why does my car vibrate when I drive?](https://www.moogparts.com/en-eu/support/the-problem-solver/technical-support/educational-articles/why-does-my-car-vibrate.html)
- [NHTSA: Tire safety — TireWise](https://www.nhtsa.gov/vehicle-safety/tires)
- [Michelin: Sidewall problems](https://www.michelinman.com/auto/auto-tips-and-advice/tire-damage/sidewall-problems)
- [MOOG: Diagnosis of worn wheel end bearings](https://www.moogparts.com/content/dam/marketing/emea/moog/pdf/technical-tips/lv/uae/MOOG-ESB-Diagnosis-of-worn-wheel-end-bearings.pdf)

## A little more clarity
### Can this confirm the failed part?
This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.
