# Tire repeatedly loses pressure

Repeated loss in one tire needs leak testing. Compare measured cold pressures rather than relying only on how the sidewall looks.

> This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.

## What you may notice
- One tire repeatedly needs inflation
- Pressure drops between similar cold measurements

## Understand the possibilities
### Puncture, valve or bead leak
Repeated pressure loss in one tire can originate at the tread, valve, bead seat or wheel. No visible nail does not exclude a leak.

**What distinguishes it**
A single tire losing more than the others in comparable conditions supports leak testing rather than just resetting TPMS.

**Safe observation**
When safely parked, check cold tire pressures against the vehicle placard and inspect visible tread and sidewalls without going under the car.

**After confirmation**
Have the tire and wheel leak-tested and assess repairability under the tire manufacturer rules.

### Tire structural or wheel damage
A bulge, exposed cord, damaged wheel or sudden deformation can compromise tire integrity and control.

**What distinguishes it**
An outward bulge differs from a normal shallow sidewall indentation; uncertain damage needs specialist assessment before use.

**Safe observation**
When safely parked, check cold tire pressures against the vehicle placard and inspect visible tread and sidewalls without going under the car.

**After confirmation**
Stop use of a damaged tire/wheel and obtain safe recovery or manufacturer-approved spare assistance. Sidewall bulges are not repaired by balancing.

### Unequal pressure or tire condition
Pressure differences and tire condition can affect straight-line tracking. Tire construction and damage also matter.

**What distinguishes it**
Compare cold pressures with the placard; a persistent pull after correction needs further inspection.

**Safe observation**
When safely parked, check cold tire pressures against the vehicle placard and inspect visible tread and sidewalls without going under the car.

**After confirmation**
Correct pressure to the placard, assess tire integrity and professionally investigate a persistent pull.

## Checks you can make safely
- When safely parked, check cold tire pressures against the vehicle placard and inspect visible tread and sidewalls without going under the car.

## Leave these to a professional
- Do not reach into a running engine bay, work under an unsupported vehicle, bypass safety systems or open fuel, high-voltage or refrigerant circuits.

## Urgent signs
- Is control difficult, is the car suddenly unstable, or is a wheel or tire visibly damaged?

Stop driving as soon as you can safely do so. Switch the vehicle off and obtain professional roadside assistance. Do not restart to investigate.

## When to get help
Arrange professional inspection. Share the conditions, warning messages and your answers; ask the workshop to confirm the cause before repair.

## Technical references
Sources explain general principles. Exact procedures and equipment depend on your vehicle. Editorial synthesis; no independent mechanic sign-off claimed.
- [NHTSA: Tire safety — TireWise](https://www.nhtsa.gov/vehicle-safety/tires)
- [Michelin: Sidewall problems](https://www.michelinman.com/auto/auto-tips-and-advice/tire-damage/sidewall-problems)
- [MOOG: Common signs of suspension problems](https://www.moogparts.com/en-eu/support/the-problem-solver/technical-support/educational-articles/suspension-problems.html)

## A little more clarity
### Can this confirm the failed part?
This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.
