# Clicking when turning

Compare repeated drive-related clicks with steering-joint knocks or strut movement. Avoid hard full-lock acceleration tests.

> This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.

## What you may notice
- Repeated clicks or knocks during ordinary turns
- May depend on applied drive or occur while parked

## Understand the possibilities
### Driveshaft or CV joint condition
Wear or damage in a driveline joint may create load-related vibration, clunks or turning clicks.

**What distinguishes it**
A change with applied torque or turning differs from tire vibration at a steady road speed. Do not provoke the sound with hard turns.

**Safe observation**
Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

**After confirmation**
Professionally inspect joints, boots, shafts and mountings, then repair the confirmed source.

### Steering linkage or joint condition
Worn, loose or binding steering joints can cause play, knocking or inconsistent steering effort.

**What distinguishes it**
Steering movement before wheel response, knocks during turning or instability need a mechanical inspection.

**Safe observation**
Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

**After confirmation**
Have linkage, joints, rack mountings and wheel suspension inspected; do not attempt to adjust out safety-critical play yourself.

### Shock absorber or strut damping
Reduced damping can allow repeated body motion and irregular tire contact. Springs, mounts and tire condition must also be checked.

**What distinguishes it**
Repeated bouncing, fluid leakage on a damper or cupped tread supports suspension inspection; a simple bounce observation cannot grade a shock.

**Safe observation**
Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

**After confirmation**
Professionally inspect dampers, springs, mounts and tires and replace confirmed faulty parts according to axle requirements.

## Checks you can make safely
- When safely parked, check cold tire pressures against the vehicle placard and inspect visible tread and sidewalls without going under the car.

## Leave these to a professional
- Do not reach into a running engine bay, work under an unsupported vehicle, bypass safety systems or open fuel, high-voltage or refrigerant circuits.

## Urgent signs
- Is control difficult, is the car suddenly unstable, or is a wheel or tire visibly damaged?

Stop driving as soon as you can safely do so. Switch the vehicle off and obtain professional roadside assistance. Do not restart to investigate.

## When to get help
Arrange professional inspection. Share the conditions, warning messages and your answers; ask the workshop to confirm the cause before repair.

## Technical references
Sources explain general principles. Exact procedures and equipment depend on your vehicle. Editorial synthesis; no independent mechanic sign-off claimed.
- [MOOG: Why does my car vibrate when I drive?](https://www.moogparts.com/en-eu/support/the-problem-solver/technical-support/educational-articles/why-does-my-car-vibrate.html)
- [MOOG: Common signs of suspension problems](https://www.moogparts.com/en-eu/support/the-problem-solver/technical-support/educational-articles/suspension-problems.html)
- [Monroe: Symptoms of worn shocks and struts](https://www.monroe.com/technical-resources/shocks-101/symptoms-worn-shock-struts.html)

## A little more clarity
### Can this confirm the failed part?
This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.
