# Car won’t move with a gear selected

Do not add throttle to force movement. First distinguish actual gear selection, lost transmission drive and a brake that has not released.

> This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.

## What you may notice
- Vehicle remains stationary after selecting a drive gear
- Engine may rev without movement

## Understand the possibilities
### Selector linkage or shift control
A linkage, cable, interlock or selector/control fault can prevent the intended gear from being selected.

**What distinguishes it**
A mismatch between lever position and indicated gear differs from engine revs rising after a gear engages.

**Safe observation**
Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

**After confirmation**
Verify selector operation and actual gear engagement with scan data and mechanical inspection.

### Transmission control or internal wear
Repeated harsh shifts, flare or slipping can involve control, valve-body or friction-element faults that need scan and hydraulic tests.

**What distinguishes it**
Rising RPM without matching acceleration differs from a single engagement clunk.

**Safe observation**
Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

**After confirmation**
Use the manufacturer diagnostic sequence to distinguish software/control issues from mechanical wear.

### Parking brake not releasing
A mechanical cable, actuator or control fault can keep a parking brake applied. Interlocks and release procedures vary by model.

**What distinguishes it**
A parking-brake message and resistance to moving differ from engine revs flaring with free-rolling wheels.

**Safe observation**
From outside a parked, cooled vehicle, note warning messages and visible leakage. Do not road-test reduced braking or touch hot wheels and discs.

**After confirmation**
Do not force movement; professionally verify release command, supply and mechanical action before recovery or repair.

## Checks you can make safely
- Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

## Leave these to a professional
- Do not reach into a running engine bay, work under an unsupported vehicle, bypass safety systems or open fuel, high-voltage or refrigerant circuits.

## Urgent signs
- Has steering or braking become unreliable, has propulsion stopped in traffic, or is there severe wheel/tire damage, smoke or an urgent stop message?

Stop driving as soon as you can safely do so. Switch the vehicle off and obtain professional roadside assistance. Do not restart to investigate.

## When to get help
Arrange professional inspection. Share the conditions, warning messages and your answers; ask the workshop to confirm the cause before repair.

## Technical references
Sources explain general principles. Exact procedures and equipment depend on your vehicle. Editorial synthesis; no independent mechanic sign-off claimed.
- [ZF / SACHS: Clutch does not disengage](https://aftermarket.zf.com/en/aftermarket-portal/knowledge-hub/clutch-does-not-disengage/)
- [ZF Aftermarket: FAQ — transmission oils](https://aftermarket.zf.com/en/aftermarket-portal/faq/faq-oils/)
- [HELLA: Checking the brakes](https://www.hella.com/techworld/en/technical/brakes/checking-the-brakes/)
- [Ford: Owner manual — maintenance information messages](https://www.fordservicecontent.com/Ford_Content/vdirsnet/OwnerManual/Home/Content?ProcUid=G1953908&Uid=G1953905&buildtype=web&countryCode=USA&div=f&languageCode=EN&userMarket=THA&vCode=&vFilteringEnabled=False&variantid=6125)

## A little more clarity
### Can this confirm the failed part?
This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.
