# Car pulls to one side

Separate a constant pull from one that appears during braking. Tires, alignment and brakes each need different evidence.

> This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.

## What you may notice
- Continuous steering correction to keep straight
- Pull may increase during braking

## Understand the possibilities
### Alignment or suspension geometry
A persistent pull with uneven tread can involve alignment or worn/damaged suspension. Road slope can imitate a mild pull.

**What distinguishes it**
A post-impact change and uneven wear add context; alignment must follow a mechanical and tire check.

**Safe observation**
When safely parked, check cold tire pressures against the vehicle placard and inspect visible tread and sidewalls without going under the car.

**After confirmation**
Inspect for damage and joint wear, then measure and adjust alignment to the correct specification.

### Unequal pressure or tire condition
Pressure differences and tire condition can affect straight-line tracking. Tire construction and damage also matter.

**What distinguishes it**
Compare cold pressures with the placard; a persistent pull after correction needs further inspection.

**Safe observation**
When safely parked, check cold tire pressures against the vehicle placard and inspect visible tread and sidewalls without going under the car.

**After confirmation**
Correct pressure to the placard, assess tire integrity and professionally investigate a persistent pull.

### Caliper movement or brake drag
Sticking guides or a piston can produce uneven wear, squeal, pull or heat.

**What distinguishes it**
Persistent one-sided noise and pull support checking caliper operation; never touch a hot wheel to compare temperatures.

**Safe observation**
From outside a parked, cooled vehicle, note warning messages and visible leakage. Do not road-test reduced braking or touch hot wheels and discs.

**After confirmation**
Service the confirmed sticking component and inspect pads/discs and hydraulic condition.

## Checks you can make safely
- When safely parked, check cold tire pressures against the vehicle placard and inspect visible tread and sidewalls without going under the car.
- From outside a parked, cooled vehicle, note warning messages and visible leakage. Do not road-test reduced braking or touch hot wheels and discs.

## Leave these to a professional
- Do not reach into a running engine bay, work under an unsupported vehicle, bypass safety systems or open fuel, high-voltage or refrigerant circuits.

## Urgent signs
- Is control difficult, is the car suddenly unstable, or is a wheel or tire visibly damaged?

Stop driving as soon as you can safely do so. Switch the vehicle off and obtain professional roadside assistance. Do not restart to investigate.

## When to get help
Arrange professional inspection. Share the conditions, warning messages and your answers; ask the workshop to confirm the cause before repair.

## Technical references
Sources explain general principles. Exact procedures and equipment depend on your vehicle. Editorial synthesis; no independent mechanic sign-off claimed.
- [MOOG: Common signs of suspension problems](https://www.moogparts.com/en-eu/support/the-problem-solver/technical-support/educational-articles/suspension-problems.html)
- [NHTSA: Tire safety — TireWise](https://www.nhtsa.gov/vehicle-safety/tires)
- [Ferodo: Brake noise — issues and solutions](https://www.ferodo.com/en-ca/technical/tech-tips/brake-noise-tips.html)

## A little more clarity
### Can this confirm the failed part?
This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.
