# Grinding when braking

Harsh metallic grinding needs a brake inspection before reuse. Wear, damaged friction parts and a dragging caliper are different possibilities.

> This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.

## What you may notice
- Harsh scraping or grinding as brakes are applied
- May be localized to a wheel or remain after release

## Understand the possibilities
### Severely worn or damaged friction parts
Worn pads or damaged discs can produce grinding and reduced braking. Metal-on-metal noise warrants stopping use until inspected.

**What distinguishes it**
Persistent harsh grinding differs from a faint initial squeal; sound cannot measure remaining pad or disc thickness.

**Safe observation**
From outside a parked, cooled vehicle, note warning messages and visible leakage. Do not road-test reduced braking or touch hot wheels and discs.

**After confirmation**
Inspect friction parts, calipers and debris professionally and replace confirmed damaged components to specification.

### Caliper movement or brake drag
Sticking guides or a piston can produce uneven wear, squeal, pull or heat.

**What distinguishes it**
Persistent one-sided noise and pull support checking caliper operation; never touch a hot wheel to compare temperatures.

**Safe observation**
From outside a parked, cooled vehicle, note warning messages and visible leakage. Do not road-test reduced braking or touch hot wheels and discs.

**After confirmation**
Service the confirmed sticking component and inspect pads/discs and hydraulic condition.

### Pad fitting or anti-noise hardware
Incorrectly fitted clips, shims or pads may create noise, especially after recent brake work.

**What distinguishes it**
Onset immediately after brake work is useful context but does not prove an installation error.

**Safe observation**
From outside a parked, cooled vehicle, note warning messages and visible leakage. Do not road-test reduced braking or touch hot wheels and discs.

**After confirmation**
Verify correct parts, orientation and hardware using the vehicle and brake manufacturer instructions.

## Checks you can make safely
- From outside a parked, cooled vehicle, note warning messages and visible leakage. Do not road-test reduced braking or touch hot wheels and discs.

## Leave these to a professional
- Do not reach into a running engine bay, work under an unsupported vehicle, bypass safety systems or open fuel, high-voltage or refrigerant circuits.

## Urgent signs
- Has braking weakened, does the pedal sink, or is there a fluid leak, smoke or a red brake warning?

Stop driving as soon as you can safely do so. Switch the vehicle off and obtain professional roadside assistance. Do not restart to investigate.

## When to get help
Arrange professional inspection. Share the conditions, warning messages and your answers; ask the workshop to confirm the cause before repair.

## Technical references
Sources explain general principles. Exact procedures and equipment depend on your vehicle. Editorial synthesis; no independent mechanic sign-off claimed.
- [Ferodo: Brake noise — issues and solutions](https://www.ferodo.com/en-ca/technical/tech-tips/brake-noise-tips.html)
- [HELLA: Checking the brakes](https://www.hella.com/techworld/en/technical/brakes/checking-the-brakes/)

## A little more clarity
### Can this confirm the failed part?
This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.
