# Battery keeps going flat

Separate a battery that cannot hold charge from insufficient charging or an electrical load during parking.

> This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.

## What you may notice
- Repeated weak starts or a flat 12 V battery
- Discharge after parking or frequent short trips

## Understand the possibilities
### Discharged or weakened 12 V battery
A weak 12 V supply may cause slow cranking on combustion vehicles, dim lights or failure to reach READY on an EV or hybrid. Voltage alone does not establish battery health.

**What distinguishes it**
Slow cranking and light dimming support this path more than normal-speed cranking.

**Safe observation**
With the vehicle off, look for obvious case damage or corrosion without touching terminals. Do not disconnect the battery with the engine running.

**After confirmation**
Test battery state, charging and connections; charge or replace only as appropriate for the vehicle.

### Electrical load while parked
An accessory left on or a module staying awake can discharge a healthy battery. Repeated overnight discharge warrants a sleep-current test.

**What distinguishes it**
A problem after parking, especially after fitting accessories, fits this path more than a charge lamp while driving.

**Safe observation**
With the vehicle off, look for obvious case damage or corrosion without touching terminals. Do not disconnect the battery with the engine running.

**After confirmation**
A workshop measures sleep current and isolates the verified circuit without bypassing safety systems.

### Charging system or connection fault
Insufficient charging or resistance in cables can leave the battery undercharged; a battery lamp does not prove an alternator alone is faulty.

**What distinguishes it**
A charge lamp while running or lights varying with engine speed supports a charging-system check.

**Safe observation**
With the vehicle off, look for obvious case damage or corrosion without touching terminals. Do not disconnect the battery with the engine running.

**After confirmation**
Test battery, charging output, voltage drops and drive condition with the correct smart-charging procedure.

## Checks you can make safely
- With the vehicle off, look for obvious case damage or corrosion without touching terminals. Do not disconnect the battery with the engine running.

## Leave these to a professional
- Do not reach into a running engine bay, work under an unsupported vehicle, bypass safety systems or open fuel, high-voltage or refrigerant circuits.

## Urgent signs
- Is there smoke, a burning smell, a hot or damaged battery, or exposed wiring?

Stop driving as soon as you can safely do so. Switch the vehicle off and obtain professional roadside assistance. Do not restart to investigate.

## When to get help
Arrange professional inspection. Share the conditions, warning messages and your answers; ask the workshop to confirm the cause before repair.

## Technical references
Sources explain general principles. Exact procedures and equipment depend on your vehicle. Editorial synthesis; no independent mechanic sign-off claimed.
- [DENSO: Alternator troubleshooting](https://www.denso-am.eu/news/alternator-troubleshooting)
- [HELLA: Checking the alternator](https://www.hella.com/techworld/en/technical/car-electronics-and-electrics/starting-and-charging-system/checking-the-alternator/)
- [HELLA: Checking the starter](https://www.hella.com/techworld/en/technical/car-electronics-and-electrics/starting-and-charging-system/checking-the-starter/)

## A little more clarity
### Can this confirm the failed part?
This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.
