# A/C isn’t cooling

Start with airflow and the pattern of cooling loss. Refrigerant leaks, air distribution and compressor control can feel similar.

> This is symptom guidance, not a confirmed diagnosis. Inspection and vehicle-specific tests are needed before replacing parts.

## What you may notice
- Air from vents stays warm with A/C requested
- Cooling is weak, intermittent or unequal

## Understand the possibilities
### Refrigerant leak or incorrect charge
Insufficient or incorrect refrigerant can reduce cooling; topping up without identifying a leak does not solve the cause.

**What distinguishes it**
Strong airflow but warm air supports a cooling-circuit check rather than only a cabin filter.

**Safe observation**
Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

**After confirmation**
A qualified technician identifies the refrigerant, leak-tests and charges to the correct specification.

### Cabin filter, blower or air flap
A restricted filter, blower fault or flap problem can reduce airflow or mix warm air into the cabin supply.

**What distinguishes it**
Weak airflow or different left/right temperatures warrants air-path and flap checks.

**Safe observation**
Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

**After confirmation**
Inspect the specified filter access, blower supply/control and flap operation before replacing parts.

### Condenser airflow or compressor control
Poor condenser airflow or incorrect compressor control can cause weak or intermittent cooling.

**What distinguishes it**
Previously better cooling while moving than while stationary supports an airflow check; do not conduct a new road test.

**Safe observation**
Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

**After confirmation**
Check condenser airflow, fan command, system pressures and compressor control professionally.

## Checks you can make safely
- Park safely, switch the vehicle fully off and consult its owner manual before any visual observation. Keep clear of moving or hot components.

## Leave these to a professional
- Do not reach into a running engine bay, work under an unsupported vehicle, bypass safety systems or open fuel, high-voltage or refrigerant circuits.

## Urgent signs
- Is visibility unsafe, or are there exhaust fumes, steam, smoke or a burning smell in the cabin?

Stop driving as soon as you can safely do so. Switch the vehicle off and obtain professional roadside assistance. Do not restart to investigate.

## When to get help
Arrange professional inspection. Share the conditions, warning messages and your answers; ask the workshop to confirm the cause before repair.

## Technical references
Sources explain general principles. Exact procedures and equipment depend on your vehicle. Editorial synthesis; no independent mechanic sign-off claimed.
- [DENSO: Seven steps of a complete A/C service — bulletin 05-AC-2025-EU](https://assets.denso-am.eu/production/attachments/DENSO-AC-Compressor-7-steps-Bulletin-EN.pdf)
- [HELLA: Cooling system check and diagnostics](https://www.hella.com/techworld/in/technical/car-cooling-system/cooling-system-check/)
- [HELLA: Air-conditioning service: car function and repairs](https://www.hella.com/techworld/en/technical/car-air-conditioning/car-air-conditioning/)

## A little more clarity
### Should I just add refrigerant?
No. The system needs the correct refrigerant and charge, and a leak may need repair. Refrigerant work, including on electric compressors, requires suitable professional equipment.
